Workplace Health and Safety Inspection Checklist
by Vertask (verified provider)
A workplace health and safety inspection checklist for supervisors and safety officers: 33 walk-through checks in six areas, each with a timing, an owner and how-to guidance, leaving a dated record of what was checked.
Free with a Vertask account. New workspaces start with a 30-day Pro trial, so you can import it straight away.
- 33 checklist items
- 6 sections
- 8 columns
- Version 1.0
- Updated Nov 21, 2026
About this template
This workbook turns a routine safety walk-through into a list of specific checks. Each check has a timing (daily to annual), a responsible role and plain guidance on what to look for. That way the walk-through does not depend on one person's memory, and you keep a record of who checked what and when.
What the sections cover
- Housekeeping & Walking Surfaces: slip and trip hazards, clear aisles, stairs and guardrails, stacking, lighting and ladders.
- Fire Safety & Emergency Exits: exit routes and doors, exit signs and emergency lighting, extinguishers, alarms and sprinklers, flammable storage and evacuation drills.
- Electrical Safety: cords and power strips, panel clearance and labeling, outlets and GFCI protection, and lockout/tagout during servicing.
- Machinery, Tools & Vehicles: machine guards, emergency stops, hand and power tools, forklift pre-use checks and pedestrian separation.
- Hazardous Materials & PPE: safety data sheets, container labels, chemical storage and spill kits, PPE, eyewash stations and noise, dust and fume controls.
- First Aid, Welfare & Reporting: first aid kits, posted emergency contacts, toilets and drinking water, temperature and break areas, corrective actions and near-miss reporting.
Working through it well
Sort the checks by timing and owner before you start. Supervisors handle the daily and weekly items, while facilities staff and the safety officer take the monthly, quarterly and annual ones. Walk the floor rather than ticking boxes from a desk. Several tips stress testing rails by hand, watching a lockout job actually being done and checking the outside of exit doors.
Record evidence as you go, such as tag dates, service report references or photo links. Every finding should end up in the corrective actions row with an owner and a deadline. Where the guidance points to your fire code, as it does for alarms, sprinklers and drills, confirm the required frequency locally.
Built for: Supervisors, safety officers and facilities teams at small workplaces running routine health and safety inspection walk-throughs
What you get
- 33 inspection checks across 6 areas, from walking surfaces and fire exits to PPE and first aid
- A suggested timing for every check, from daily through annual, so you know what is due when
- A responsible role named for each check: supervisor, facilities, safety officer, management or all employees
- Beginner how-to guidance and a practical pro tip on every row
- A dated record of who completed each check, with links or reference numbers as evidence
- A built-in step for recording hazards and assigning corrective actions until they are closed
What you’ll record
Filled in for you
- Step · short text
- Timing · dropdown: Daily, Weekly, Monthly, Quarterly, Annually
- Responsible · dropdown: Supervisor, Safety Officer, Facilities / Maintenance, All Employees, Management
- How To (Beginner Guidance) · long text
- Pro Tip · long text
You fill in
- Notes / Evidence (doc link, ref #) · long text
- Completed By · short text
- Date Completed · short text
A look inside
1. Housekeeping & Walking Surfaces 6 items
| Step | Timing | Responsible | How To (Beginner Guidance) | Pro Tip | Notes / Evidence (doc link, ref #) you fill in | Completed By you fill in | Date Completed you fill in |
|---|---|---|---|---|---|---|---|
| Check floors, aisles and stairs for slip and trip hazards | Daily | Supervisor | Walk the work area. Look for spills, loose mats, cords across walkways, damaged flooring and clutter. Fix or cordon off hazards right away. | Slips, trips and falls are among the most common workplace injuries, and usually the cheapest to prevent. | |||
| Keep aisles and work areas clear | Daily | All Employees | Aisles and passageways should be wide enough for the traffic they carry and free of stored materials. | Mark aisle edges on the floor. Painted lines stop gradual creep. | |||
| Inspect stairs, handrails and guardrails | Monthly | Facilities / Maintenance | Check treads, nosings, handrails and guardrails on stairs, platforms and mezzanines for damage and looseness. | Test rails by hand. A visual check misses loose fixings. |
2. Fire Safety & Emergency Exits 6 items
| Step | Timing | Responsible | How To (Beginner Guidance) | Pro Tip | Notes / Evidence (doc link, ref #) you fill in | Completed By you fill in | Date Completed you fill in |
|---|---|---|---|---|---|---|---|
| Check exit routes and doors | Daily | Supervisor | Exit routes must be unobstructed and exit doors must open from inside without a key or special knowledge during working hours. | Check the outside of exit doors too. Deliveries and snow block them. | |||
| Check exit signs and emergency lighting | Monthly | Facilities / Maintenance | Confirm exit signs are lit and visible and test emergency lights with the test button. | Log each test with the date. | |||
| Inspect fire extinguishers | Monthly | Safety Officer | Each extinguisher should be in its place, visible, accessible, with the pressure gauge in the green and the pin and seal intact. Arrange professional servicing… | Initial and date the tag at each monthly check. |
+ 27 more items in 4 more sections
Every section
- 1. Housekeeping & Walking Surfaces 6
- 2. Fire Safety & Emergency Exits 6
- 3. Electrical Safety 4
- 4. Machinery, Tools & Vehicles 5
- 5. Hazardous Materials & PPE 6
- 6. First Aid, Welfare & Reporting 6
Questions
What does a workplace safety inspection checklist cover?
This one covers six areas: housekeeping and walking surfaces, fire safety and exits, electrical safety, machinery, tools and vehicles, hazardous materials and PPE, and first aid, welfare and reporting. There are 33 checks in total.
How often should each inspection item be done?
Each check comes with a suggested timing of daily, weekly, monthly, quarterly or annually. For items such as fire alarms, sprinklers and evacuation drills, the guidance tells you to follow the schedule your fire code requires.
Does this checklist guarantee compliance with OSHA or other regulations?
No. The workbook does not cite or map to a specific regulation. It is a practical walk-through checklist, so confirm your local legal and fire code requirements separately.
Who should carry out the checks?
Every row names a responsible role, usually a supervisor, facilities or maintenance staff, or a safety officer. A few items fall to all employees or to management.
How do I record what I found during the inspection?
For each check you fill in notes or evidence such as a document link or reference number, who completed it and the date. Each row also has a status of Not started, In progress or Completed.
How are hazards followed up after the walk-through?
The final section includes a weekly step to write up each hazard, who will fix it and by when, then follow up until it is closed. Its tip suggests creating a Vertask task for each action.
Do I need a paid plan to use this template?
Getting the template is free with a Vertask account. Importing it into a working checklist uses Workbooks, which is on the Pro plan; new workspaces start with a 30-day Pro trial.
Can I change it after importing?
Yes. Importing creates your own copy: rename, add or remove sections, rows and columns. The template itself never changes, and you can clone your copy per client, property or device.
How to use it
- Sign up free We take you straight to this template afterwards.
- ImportIt becomes a working checklist with an owner, a status and a date on every line.
- Make it yoursEdit any step, add your own, then clone it per client, property or device.
