Rental Unit Housing Inspection Checklist
by Vertask (verified provider)
A health and safety inspection checklist for rental units, organized by outside, common areas and the unit. It takes inspectors and property managers from notice of entry through a signed report, repair tracking and reinspection.
Free with a Vertask account. New workspaces start with a 30-day Pro trial, so you can import it straight away.
- 39 checklist items
- 8 sections
- 8 columns
- Version 1.0
- Updated Nov 21, 2026
About this template
This workbook guides a rental unit health and safety inspection from start to finish. It is organized like HUD's NSPIRE inspection areas (outside, inside common areas and the unit) and covers life safety, electrical, plumbing, heating, sanitation, structure and follow-up on deficiencies. It is a general guide. For program inspections, the published standard and its official form decide what counts as a deficiency and how severe it is.
What the sections cover
- Inspection Preparation confirms the standard, gives the tenant notice, reviews prior reports and open work orders, and gathers tools.
- Outside: Site & Building Exterior covers address signage, walkways and railings, roof and foundation, exterior electrical, trash and pests, fences and play areas.
- Inside: Common Areas & Building Systems checks exits, fire alarms and extinguishers, stairs, mechanical and laundry rooms, and elevators.
- Unit: Life Safety, Unit: Electrical, Plumbing & Heating, Unit: Kitchen, Bath & Sanitation and Unit: Structure & Interior work through the dwelling itself, including smoke and carbon monoxide alarms, bedroom egress, gas hazards, mold, pests and deteriorated paint in pre-1978 housing.
- Report, Repairs & Reinspection handles the signed report, severity and deadlines, owner and tenant notice, work orders and close-out.
Working through it well
Check repeat deficiencies from the last report first, since they carry more weight. Use the same photo routine on every item, such as a wide shot then a close-up, and record exact locations so maintenance can find the problem. Treat life-threatening findings, such as exposed live wiring, missing smoke alarms or a gas odor, as same-day matters. When writing the report, record what you saw, where and how large, not conclusions. Schedule the reinspection before you leave the first visit.
Built for: Housing inspectors, property managers and landlords inspecting rental units for health and safety deficiencies
What you get
- 39 inspection steps across 8 sections, from preparation through reinspection and close-out
- Areas grouped like HUD's NSPIRE: outside, inside common areas and the unit
- Beginner guidance and a pro tip for every step, with timing and the responsible role
- Unit life safety checks for smoke and CO alarms, entry doors, bedroom egress and gas hazards
- A follow-up section for severity, deadlines, owner and tenant notice, work orders and reinspection
- A record of who completed each step and when, with notes and evidence references
What you’ll record
Filled in for you
- Step · short text
- Timing · dropdown: Before Inspection, During Inspection, After Inspection
- Responsible · dropdown: Inspector, Owner / Landlord, Property Manager, Maintenance, Tenant
- How To (Beginner Guidance) · long text
- Pro Tip · long text
You fill in
- Notes / Evidence (doc link, ref #) · long text
- Completed By · short text
- Date Completed · short text
A look inside
1. Inspection Preparation 4 items
| Step | Timing | Responsible | How To (Beginner Guidance) | Pro Tip | Notes / Evidence (doc link, ref #) you fill in | Completed By you fill in | Date Completed you fill in |
|---|---|---|---|---|---|---|---|
| Confirm the inspection standard and form | Before Inspection | Inspector | Identify which standard applies: your local housing code, a housing authority program standard such as HUD's NSPIRE, or your own company checklist. Use the off… | This workbook is a general guide. For program inspections, the published standard decides what is a deficiency and how severe it is. | |||
| Give proper notice of entry | Before Inspection | Property Manager | Notify the tenant in writing of the date, time window and purpose, following the notice period in your lease and local law. | Ask the tenant to list any problems in advance. It shortens the visit and surfaces hidden issues. | |||
| Review prior reports and open work orders | Before Inspection | Inspector | Read the last inspection report and outstanding repair requests so you can verify earlier deficiencies were corrected. | Repeat deficiencies carry more weight than new ones. Check them first. |
2. Outside: Site & Building Exterior 6 items
| Step | Timing | Responsible | How To (Beginner Guidance) | Pro Tip | Notes / Evidence (doc link, ref #) you fill in | Completed By you fill in | Date Completed you fill in |
|---|---|---|---|---|---|---|---|
| Check address signage and site lighting | During Inspection | Inspector | The building address should be visible and legible from the street. Exterior and walkway lighting should work. | Emergency responders rely on visible numbers. It is a simple item that is often missed. | |||
| Inspect walkways, stairs, handrails and guardrails | During Inspection | Inspector | Look for trip hazards, broken steps and loose or missing handrails and guardrails on stairs, porches and balconies. | Push and pull on every railing. Looking is not a test. | |||
| Inspect roof, gutters, siding and foundation from the ground | During Inspection | Inspector | Look for missing roofing, sagging, detached gutters, holes or rot in siding, and foundation cracks or openings that admit water or pests. | Note the location precisely, for example north wall near the rear door, so maintenance can find it. |
+ 33 more items in 6 more sections
Every section
- 1. Inspection Preparation 4
- 2. Outside: Site & Building Exterior 6
- 3. Inside: Common Areas & Building Systems 5
- 4. Unit: Life Safety 5
- 5. Unit: Electrical, Plumbing & Heating 5
- 6. Unit: Kitchen, Bath & Sanitation 5
- 7. Unit: Structure & Interior 4
- 8. Report, Repairs & Reinspection 5
Questions
Is this an official HUD NSPIRE inspection form?
No. It is organized like the NSPIRE inspection areas but is a general guide. For program inspections, use the official form and the published standard to decide deficiencies and severity.
Does the checklist cover common areas and the building exterior, or only the unit?
It covers all three. There are sections for the site and building exterior, for common areas and building systems such as exits, fire alarms, laundry rooms and elevators, and four sections for the unit itself.
Who is each step assigned to?
Each step names a responsible role: Inspector, Property Manager or Maintenance. Most inspection steps fall to the inspector, while notice of entry and results notification go to the property manager and repair work orders go to maintenance.
Does it address lead paint, mold and pests?
Yes. The kitchen, bath and sanitation section includes checks for mold and water damage, pest infestation, and deteriorated paint in housing built before 1978, with a reminder not to scrape or sand it and to follow lead-safe rules.
What happens after deficiencies are found?
The final section walks through signing the report, classifying deficiencies by severity with correction deadlines, notifying the owner and tenant in writing, opening work orders with before and after photos, and reinspecting to close out.
What do I record as I work through the inspection?
For each step you record notes or evidence such as a document link or reference number, who completed it and the date. Each row also carries a status of Not started, In progress or Completed.
Do I need a paid plan to use this template?
Getting the template is free with a Vertask account. Importing it into a working checklist uses Workbooks, which is on the Pro plan; new workspaces start with a 30-day Pro trial.
Can I change it after importing?
Yes. Importing creates your own copy: rename, add or remove sections, rows and columns. The template itself never changes, and you can clone your copy per client, property or device.
Provided as is.
How to use it
- Sign up free We take you straight to this template afterwards.
- ImportIt becomes a working checklist with an owner, a status and a date on every line.
- Make it yoursEdit any step, add your own, then clone it per client, property or device.
Useful for
